1 / 4
Schneckenkragen 2 -- Electric Boogaloo (Slug Collar) — image 1
1 / 4

Schneckenkragen 2 -- Electric Boogaloo (Slug Collar)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Put the Schneckenkragen around your seedlings when you plant them outside to keep away slugs.

Rating
0 / 5
Likes
16
Downloads
68
Makes
0
Views
627
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

The Schneckenkragen will keep away slugs from your plants. But make sure that they are not hatching inside or find bridges, i.e., leaves of the plant touching the ground outside.

If the collar alone is not working well enough, or you want to make sure that an especially delicious plant survives, the second model is an upgrade to an electric fence. It has a holder for 9 V Batteries. Stick two lanes of copper tape to the outside, such that they do not touch, but only have a narrow gap and connect them to the terminals of the battery. Then put silicon glue on the battery to protect against water. (See images) 

If a slug or snail touches both copper lanes at the same time, the circuit will be closed and the slug will not move further in this direction.

The battery-less variant can be stacked, either for storage or to pose as an additional hurdle for the slugs.

Print in PETG (or ASA) for UV resistance. If you have problems with bed adhesion, print a brim inside for easy removal.

This model is scaled for the 21 cm print bed of the MK4. For smaller beds, it might be possible to scale it slightly in X and Y direction.

For further information, there is a Wikipedia entry, but apparently only in German. So, might not work for slugs speaking other languages. https://de.wikipedia.org/wiki/Schneckenkragen

Tags