1 / 3
DBS - Gohan beast portrait - HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Son Gohan beast mode portrait, PrusaSlicer version
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 63
- Makes
- 1
- Views
- 498
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Here is the PrusaSlicer version I used on my Prusa MK4 with MMU3. You can use the recommended 3MF or STL with the manual print instructions below.
Manual print instructions
Print at:
- 100% infill
- Layer height: 0.08mm
- First layer height: 0.4mm
- Ironing: 15%
Filaments Used:
- Polymaker PolyTerra PLA+ Black
- Polymaker PolyTerra PLA+ Red
- Polymaker PolyTerra PLA Fossil Grey
- Polymaker PolyTerra PLA Cotton White
Swap Instructions:
- Start with Black
- At layer #6 (0.56mm) swap to Red
- At layer #10 (0.88mm) swap to Grey
- At layer #14 (1.2mm) swap to White for the rest.