1 / 3
30 Degree 9mm Utility Blade Butterfly Knife/Balisong — image 1
1 / 3

30 Degree 9mm Utility Blade Butterfly Knife/Balisong

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Butterfly knife with a snap-off utility blade...blade. Optional permanent/removable blade safety covers.

Rating
0 / 5
Likes
20
Downloads
82
Makes
2
Views
1,094
Reviews
0

Updated at source:

Model information

Category
Tools
License
GNU General Public License v3.0

Print on very high or solid infill for rigidity and weight. Use supports and align in slicer according to reference image.

 

Assembly:

M2 nuts should be press fit into the handles with pliers, on the side with hex cutouts. Screw holes may need to be slightly widened with a knife depending on printer quality/settings (elephants foot, thermal shrinking), or screws can be threaded through. Handle slop can be adjusted by tightening or loosening the screws that go through the bearings.

 

Hardware needed:

(Handles)

-4x M2 Nuts 

-4x M2x12 Hex Screws

-4x 2x5x2.3mm Flanged Ball Bearings (Link)

 

(Blade clamp)

-1x M3 Nut

-2x M3 Washers

-1x M3x8 Hex Screw

-1x 30 Degree 9mm Snap-off Utility Blade

 

Note:

Two safety covers are included. One is meant to be used with the blade clamp and is quickly removable, the other is integrated as part of the blade clamp if you would rather use this as a fidget toy.

Tags