Minimoa Göppingen Gö 3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a static model of the legendary Göppingen Gö 3 Minimoa. The model comes in a ready to use bluid plate. If the…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 58
- Makes
- 0
- Views
- 384
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Share Alike
This is astatic model of the legendary Göppingen Gö 3 Minimoa.
The model comes in a ready to use bluid plate. If the outer wing parts are too difficult to print straight up, it might be a good idea to print these flat.
Printed just fine on my Ender 3 with 0.16mm PLA layers, after a slicing done with PusaSlicer.
No raft or brim used, these would probably be a pain to remove ^^
You may also want to check my full collection: ASK-13, my Br905 Fauvette, my JS3, Janus C, Libelle H205, Horten IVa and my Ka6e.
Finishing
- Basic finishing can be done with just acrylic paint applied with a brush or even using a felt pen.
- For a pro finish I use the following:
- Rough sanding of the model
- Apply UV resistant epoxy resin witha brush
- Fine grain sanding
- Acrylic paint applied with airbrush
- Clear acrylic coating applied with airbrush
If you like that model please consider making a small donation to the "Cartable & Sparadrap" charity supporting school for children in Toulouse hospitals. Thanks :-)
Category: Vehicles