Potentiometer Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A way to fasten down a specific potentiometer with 2 screws
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 247
- Makes
- 1
- Views
- 792
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I needed to mount the potentiometer that came with a power supply rigidly. The back of the potentiometer says “Cosmos Tokyo RV24YN 20S B502 127C 3 2 1”.
It came with this Genmitsu air cooled 300W spindle: https://www.amazon.com/dp/B0819C92D2
This holds the potentiometer “sideways”, so the leads have space to go into. Because of a small plastic pin, the model can't simply be mirrored to mount it with the leads going the other direction. The model is upside down, and should be flipped for support-free printing.
In case it helps verify whether this is suitable for any other use, the body of the potentiometer is 25mm diameter, the threads around the knob are roughly 8.7 mm diameter, there are 3 small indents into the black plastic part of the body, 2 mm wide and 120 degrees apart, and there is a small pin, roughly 2.5 mm in diameter to the left of the knob.