Casement / Awning Window Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the handle/crank used to open or close a some casement windows. It press-fits over a spline on the window.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 145
- Makes
- 0
- Views
- 497
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Some casement or awning windows are opened/closed by turning a handle that fits over a spline. These cranks seem designed to fail before the window itself when torque is wrongly applied, so replacements are sometimes needed.
This handle press-fits onto a spline that is part of the window. Rotate under gentle pressure until it locks into place, and then press harder. It is designed for an 11-tooth spline with an outer diameter of 3/8 inches, but the FreeCAD file is included if yours is different.
No support material is required. Mine, printed out of PLA with default settings on a Prusa Mini, seems to be strong enough.