1 / 2
Simple Drawer Pulls
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Introduction:
- I've designed these pulls as replacement for broken drawer pulls, or for new drawers.
Mounting Options:
- There are three mounting options: Embedded #8-32 Nut, Embedded M4 Nut, and Front Screw.
- Embedded #8-32 Nut:
- Two #8-32 nuts and two #8-32 screws are needed for pulls in this folder.
- The screw length should be 1/4 inches (~6 mm) plus the thickness of the drawer face thickness.
- Embedded M4 Nut:
- Two M4 nuts and two M4 screws are needed for pulls in this folder.
- The screw length should be 1/4 inches (~6 mm) plus the thickness of the drawer face thickness.
- Front Screw:
- Two #8 (~4.2mm) wood screws are needed to screw the pull onto the drawer face.
- The screw length should be slightly shorter than 36 mm plus the thickness of the drawer face.
Hole Spacing:
- The number in the file name indicate the hole spacing of the screw holes.
- I've published the most common hole spacing on the market, which are 64, 76, 96, 128, 160, 224 mm.
- If your drawer has hole spacing not published here, feel free to DM me, I'll add it if I'm available.
- I've uploaded the Blender files, feel free to modify them to suit your needs.
Disclaimer:
- Depending on the filament you used, and how heavy your drawer is, the pulls might not be strong enough for your use case. Use them on your own discretion.