1 / 1
VZ-Hextrudort Adaptor for the RatRig toolhead
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
RatRig Toolhead VZ-Hextrudort Adaptor
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 52
- Makes
- 2
- Views
- 930
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Hi!
Here is an adaptor plate which enables mounting the VZ-Hextrudort extruder to the RatRig Toolhead aluminium top plate.
Mounting is done by countersunk M3 bolts as follows:
- add 2 x 6 mm bolts to the exterior countersunk holes;
- dissasemble the extruder until you are left with the mid piece which has the mounting holes;
- bolt the adaptor plate to the extruder using 2 x 8 mm bolts;
- bolt the adaptor+extruder assembly to the RatRig top plate;
- reassemble the extruder.
The left bolt is a bit harder to reach/turn due to the constrains, but can be tighten at the start with a ball end and after with the regular hex head.
I recommend to print it out of a stiff material or have it aluminium CNC'ed.
Have a good one!