Sewing machine Bobbin cases // 2 Versions // D=20,3; D=22mm -- (*.f3d-file)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular Bobbins with fix oriantation for different machines // 2 parts to push together
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 72
- Makes
- 2
- Views
- 483
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi - there are 2 modular designed Sewing machine bobbin cases for the bobbin thread which will simply pushed together – Phases are set to get a solid hold on the edges.
Mounting Hints:
1.) there is an fixed correct oriantation through design - Same holes allign!
2.) Do the pressing from top with flat surface below and in best case also from top. Use something flat and press in the middle :)!
relevant dimensions for setting the bobbin into the machine:
D := outer diameter
d := inner Diameter of hole
h := height complete
(of course in the complete pressed in position - cut shows the half pressing in state)
Printed in PLA or PETG.