1 / 2
Extruder mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple mount for mounting an extruder to 2020-frame, see below for the extruder-link and BOM
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 240
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The extruder used can be found here.
BOM:
2pc M3*6*5 heat-threaded insert
2pc M3*12mm screw
2pc M5*9-10mm screw
Opt: 2 washers for the M5-screws
Settings used:
Printed at 100mm/s at 0.2mm layerheight, using PLA.
4 walls, 4 top/bottom-layers, gyroid-infill used at 5%, adaptive layers should be enabled but can be left disabled.