1 / 1
FUJITSU Server PRIMERGY RX100 S8p SFF SATA/SAS Simple Caddy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for FUJITSU Server PRIMERGY RX100 S8p, but can be good for toher models.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 41
- Makes
- 0
- Views
- 361
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
You need 4pcs M3x4 or M3x5 countersunk screw to fit the drive in the caddy.
Tested servers:
- FUJITSU Server PRIMERGY RX100 S8p
- FUJITSU Server PRIMERGY TX120 S3p
The v2_rev2 is the best to print.
There is no lock mechanism, but it fits perfectly.
Recommended:
- Printing material: PETG
- No need for supports.
- If your bed adhesion is not great you may need brim.
- 100% infill
- With 0.4mm nozzle:
- Minimum perimeters: 3