Christmas Tree
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.14 – €0.17 net (excluding VAT)
For file: Christmas_Tree_Star_0.2mm_PLA_MINI_12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.16 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 12 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Decorative small Christmas Tree.
- Rating
- 5 / 5
- Likes
- 223
- Downloads
- 1,507
- Makes
- 17
- Views
- 5,209
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Christmas Tree
The christmas tree consists of 3 parts that can be easily plugged together: Tree, stand and star. The christmas tree has a total height of about 15 cm.
There are 2 versions for the tree:
- Christmas_Tree: Normal version without snow.
- Christmas_Tree_2: Here, some snow is indicated at the tops of the fir trees. Thus a filament change (green -> white) is necessary here. The filament change is set in the gcode file. The snow has a height of 0.6 mm.
---
Weihnachtsbaum
Der Weihnachtbaum besteht aus 3 Teilen, die einfach zusammengesteckt werden können: Baum, Ständer und Stern. Der Weihnachtsbaum hat eine Gesamthöhe von etwa 15 cm.
Für den Baum gibt es 2 Versionen:
- Christmas_Tree: Normale Version ohne Schnee.
- Christmas_Tree_2: Hier wird an den Tannenspitzen etwas Schnee angedeutet. Somit ist hier ein Filamentwechsel (grün -> weiß) erforderlich. In der gcode-Datei ist der Filamentwechsel eingestellt. Der Schnee hat eine Höhe von 0,6 mm.
---
My Print Settings
- Printer: Prusa MINI (0.4 mm nozzle)
- Rafts: No
- Supports: No
- Resolution: 0.2 mm
- Infill: 15 %
- Filament brand: BASICFIL
- Filament color: Green, white, yellow
- Filament material: PLA