Smoker Vase
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.66 – €3.25 net (excluding VAT)
For file: Smoker Vase ground_0.2mm_PETG_MK3S_3h18m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.96 excluding VAT (range midpoint).
- Weight reported by the author
- 32 g
- Print time reported by the author
- 3.3 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Rauchervase zum abbrennen von Räucherkegel / Smoking vase for burning incense cones
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 51
- Makes
- 0
- Views
- 758
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
Mit dieser Räuchervase könnt ihr eure Räucherkegel abbrennen lassen. Einfach die Teile aus PETG oder ASA ausdrucken (PLA kann ich durch die Wärmeentwicklung nicht empfehlen). In den Fuß steckt ihr die Schale eines abgebrannten Teelichts. Damit ihr den Rauch etwas steuern könnt befinden sich im Fuß Luftschlitze die sich durch drehen des äußeren Rings einstellen lassen. Dann einfach den Räucherkegel anzünden den Körper aufstecken und zuschauen.
In English:
With this incense vase you can let your incense cones burn down. Simply print out the parts made of PETG or ASA (I cannot recommend PLA due to the heat generated). In the foot you put the bowl of a burnt tea light. So that you can control the smoke somewhat, there are air slots in the foot that can be adjusted by turning the outer ring. Then just light the incense cone, put on the body and watch.