Tapo C500 C510 C520 magnetic mount

Print with normal snug supports, magnets holes on top, as supplied in the files.

for the magnets, you'll need:
• 4* disc magnets, 20mm * 5mm, with 5mm holes
• 4* M4 10mm countersunk bolt screws (a bit more than 10mm can fit as the Tapo camera support is hollow)
• 4* M4 nuts
I made a 6 magnets version if you want/need additional magnetic strength.

for the camera, you'll need:
• 4* M4 ~16mm screws which head has a flat bottom, preferably with washers; cut them at the required length
• 4* M4 nuts

AliExpress links to buy the components:
(those links are affiliated, using them will cost you nothing, but will support my work)
(you can try and browse for other cheaper sellers)

magnets: https://l.kioa.net/printables/magnet-disc-holed (20x5-5mm variant)
magnet screws: https://l.kioa.net/printables/screws-countersunk-bolt (M4 variants, 10mm length)
camera support screw: https://l.kioa.net/printables/screws-hexsocket (M4 variants, 16mm length)
hex nuts for both: https://l.kioa.net/printables/hex-nuts (M4 variants)

alternative for hex nuts and camera support screws: https://l.kioa.net/printables/screws-hexsocket-captivewashers-nuts-kit