1 / 4
Window Blocker
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Thing will block your windows from closing due to draft.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 54
- Makes
- 0
- Views
- 597
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Thing will block your windows from closing due to draft. You can put foam on the edge of the window blocker to cushion everything.
- The thread and the bolt is an M10 thread with -0.2mm offset (-0.4mm in total) on upper and lower part of the thread to add more clearance.
- The middle layer of the thread and the bolt have a filet of 0.15mm.
Remember that on most slicer you can cut the height of the block if that to bif for your windows.
IMPORTANT :
You can print this block in different orientation, but try not to add support to the threads, otherwise the bolt may not be able to screw in properly.
I personally use organic support.