1 / 4
B.K. Licht LED Light Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for an LED undermount bar from B.K. Licht for my Anycubic Kobra 2 Plus.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 41
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
### Deutsche Beschreibung weiter unten.
A holder for an undermount LED bar from B.K. Licht GmbH & Co. KG for my Anycubic Kobra 2 Plus.
LED bar: https://www.amazon.de/dp/B07NBKS9QS?psc=1&ref=ppx_yo2ov_dt_b_product_details
Fixing material
- 2 Screws M3 x 16mm
- 2 Washers
- 2 T-Nuts M3 (EU20-M3 ×10×6)
- Cable ties
Temperatures, speed and material.
- Filament: PLA
- Printing speed: 100,0mm/s
- Layer thickness: 0,2mm
- Infill: 10%
- Infill pattern: Cubic
- Printing temperature: 215 C
- Temperature Hot Bed: 65 C
- Plate adhesion: Yes
- Support: No
Approximate printing times and filament quantities.
- 1 Light Bar: Time: ~1:20h, quantity: ~29,64gr, ~9,86m
- 2 Light Bars: Time: ~2:39h, quantity: ~59,04gr, ~19,64m
### German
Ein Halter für eine Unterbau LED Leiste von B.K. Licht GmbH & Co. KG für meinen Anycubic Kobra 2 Plus.
LED Leiste: https://www.amazon.de/dp/B07NBKS9QS?psc=1&ref=ppx_yo2ov_dt_b_product_details
Befestigungsmaterial
- 2 Schrauben M3 x 16mm
- 2 Unterlegscheiben
- 2 T-Nuts M3 (EU20-M3 ×10×6)
- Kabelbinder
Temperaturen, Geschwindigkeit und Material.
- Filament: PLA
- Druckgeschwindigkeit: 100,0mm/s
- Schichtdicke: 0,2mm
- Füllung: 10%
- Füllmuster: Würfel
- Drucktemperatur: 215 C
- Temperatur Druckplatte: 65 C
- Druckplattenhaftung: Ja
- Stützstruktur: Nein
Ungefähre Druckzeiten und Filamentmengen.
- 1 Leuchtenhalter: Zeit: ~1:20h, Menge: ~29,64gr, ~9,86m
- 2 Leuchtenhalter: Zeit: ~2:39h, Menge: ~59,04gr, ~19,64m