MMU3 - Data and Power Cable Guide
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.60 – €0.74 net (excluding VAT)
For file: mmus3_cable_guide_V1_0.2mm_PETG_MK3S_51m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.67 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 51 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
To quickly disconnect the MMU3 from the printer, you have to unplug it at the MMU. This guide makes it effortless.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 77
- Makes
- 3
- Views
- 556
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
You just attach the cable guide on the hinge of the MMU3.
You need a M3 x 16 mm Allen screw instead of a 10 mm.
Put in the core in the hole in the middle before attaching it to the hinge. It will prevent any shifting of the guide.
The model was created with FreeCAD 0.21.2.