1 / 3
Ubiquiti Unifi Cloud Key Gen2 Plus wall holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket to mount your Unifi Cloud Key Gen2 Plus to a wall with just two screws with easy removal of the cloud key.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 322
- Makes
- 2
- Views
- 852
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Most mounts I could find for the Cloud Key Gen2 variant involve two brackets, both of which are screwed down. I want to be able to remove the cloud key without the use of a screwdriver and with as few holes drilled into my walls as possible. This model is more of a pouch with a tight fit that the key rests in, avoiding most of the downsides mentioned above.
Designed to be used with screws with a diameter of 3-3.5mm, screw head ≤ 7mm, 80mm apart.
Print recommendations:
- ≥20% infill
- Ensure that you a good first layer, the model is prone to warp due to the relatively thin walls.
- You may have to flip the model on import.