1 / 2
Naruto - Kyubi mode - HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Naruto Kyubi mode, PrusaSlicer version
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 65
- Makes
- 0
- Views
- 446
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Share Alike
Here is the PrusaSlicer version I used on my Prusa MK4 with MMU3. You can use the recommended 3MF or STL with the manual print instructions below.
Manual print instructions
Print at:
- 100% infill
- Layer height: 0.08mm
- First layer height: 0.16mm
- Ironing: 15%
Filaments Used:
- Polymaker PolyTerra PLA+ Black
- Prusament Orange
- Polymaker PolyTerra PLA Savannah Yellow
- Polymaker PolyTerra PLA Cotton White
Swap Instructions:
- Start with Black
- At layer #12 (1.04mm) swap to Orange
- At layer #18 (1.52mm) swap to Yellow
- At layer #20 (1.68mm) swap to White for the rest