Noel Train
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Noel Train
- Rating
- 5 / 5
- Likes
- 73
- Downloads
- 257
- Makes
- 4
- Views
- 1,776
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- GNU General Public License v2.0
The Noel Train was printed on the MK3S printer
The filament was Prusament PLA, Lipstick Red, Vanilla White and Pearl Green, the print load on the mk3 was usually for making four trains as once, printer on the textured build plate.
Note - I print PETG to and since PLA and PETG don't print well on the same sides, one side of the textured build plate was labeled "PLA Side" and the other "PETG Side"
It was screwed together with #4 self-taping screws, the round head were used on the wheels with the countersunk underneath holding the body parts together and the 1/2" eye screws as the couplers. We open one of the eye screws up very little and looped another eye screw into the opened one, then used the pliers to close the two together making the coupler and it is then threaded into the body parts.
Fasteners used per Noel Train:
Everbilt 1/2" Screw Eye 8 per Train
4 x 1/2" Round Head Self Tapping Screws 22 per Train
4 x 1/2" Counter Sunk Self Tapping Screws 11 per Train