1 / 4
Volcano Direct for Two Trees Bluer + Sailfin
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy print. Easy mount. STEP file inside. Enjoy! Uses Sailfin Extruder: https://github.com/CroXY3D/Sailfin-Extruder
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 32
- Makes
- 0
- Views
- 334
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Easy print. Easy mount. STEP file inside. Enjoy!
Uses Sailfin Extruder: https://github.com/CroXY3D/Sailfin-Extruder
This modification uses stock fans and heater with thermistor, except hotend fan - you'll need a 40mm 24v fan
Weld-in brass nuts are also not required or used ;)
Print Settings
Printer:
Two Trees Bluer
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
20
Filament:
White
Notes:
Use line width 0.5 - with a line width of 0.4 will also work
All the parts are already properly oriented
Category: 3D Printer Parts