Simple Post-It Note (76x76mm) and pen holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.55 – €1.90 net (excluding VAT)
For file: postit_note_holder_76x76x50_0.4n_0.15mm_PLA_MK4IS_1h14m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.73 excluding VAT (range midpoint).
- Weight reported by the author
- 32 g
- Print time reported by the author
- 1.23 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple model of a Post-It Note (76x76mm) holder. Two variants are supplied: with / without pen holder,
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 46
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple holder for Post-It Notes (note size 76x76mm; a 50mm high block fits nicely in the holder). Two designs are provided: with/without pen holder
Design: Tinkercad. Slicing/printing: Prusaslicer 2.7.4 and Prusa MK4, fw 6.0.2; Prusament PLA, 0.4 mm nozzle; 0.15 mm layer height, perimeters/top/bottom 4/6/6, no infill, no supports; orientation as shown in the slicer plate pictures; other conditions as in MK4's Speed/IS profile. A .bgcode file is supplied along with each .stl model.