1 / 1
BUHO HUEFORGE
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Standard Digital File License
Description Print at 100% infill with 0.08mm layer height and 0.16mm base layer
Filaments used: PLA BambuLab Basic Black Transmission distance: 0.6
PLA BambuLab Basic Black Transmission distance: 0.6
PLA BambuLab Basic Jade White Transmission distance: 5
PLA BambuLab Basic Black Transmission distance: 0.6
PLA BambuLab Basic Jade White Transmission distance: 5
PLA BambuLab Basic Black Transmission distance: 0.3
PLA BambuLab Basic Red Transmission distance: 4
PLA BambuLab Basic Yellow Transmission distance: 6
PLA BambuLab Basic Black Transmission distance: 0.6
!!!! It sounds like you have mixed filament types. Make sure this is what you want. !!!!!
Exchange instructions: Start with black On layer #7 (0.64mm),
change to black On layer #8 (0.72mm),
change to Jade White On layer #9 (0.8mm),
change to Black At layer #10 (0.88mm),
change to Jade White On layer #14 (1.2mm),
change to Black At layer #16 (1.36mm),
change to red On layer #18 (1.52mm),
change to Yellow On layer #23 (1.92mm),
change to Black for the rest.