1 / 4
Safety sliding sleeve for laundry drying rack
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
for 16 mm pipe. The sleeve has an internal diameter of 26 mm.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The sleeve is pushed over the hinge of the rack to prevent the rack from collapsing unintentionally. Unfortunately, the plastic sleeve was not UV-resistant in my case. The spare part consists of two parts so that the stand does not have to be dismantled.
The two parts are screwed together with two 3 x 14 mm PT screws.
Print with PET-G. Or even better with ASA for maximum UV-stability.
Translated with DeepL.com (free version)