NEStang FPGA-Bluetooth Case - NES-Videogame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My 3d printable Case for the NEStan-core (made by nand2mario) Now with Bluetooth-Controller-Support (ESP32-WROOM32)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Public Domain
A 3d printable Case for the NEStan-core, made by nand2mario running on the tangnano20k fpga produced by SipeedIO.
NEStang Github Project
1x TangNano20k aliexpress
1x ESP32 WROOM32 USBC aliexpress
1x USB-C 2cable Socket aliexpress (NO.610D)
1x Switch LED 16mm aliexpress (3-6V,Latching Fixed)
1x Switch LED Reset 12mm (3-6V, Momentary Reset)
6x M3x8 Sockethead-Screws
6x M3x4x5 Inserts
ESP32-Firmware:
---------------------
BlueRetro_hw1_snes (Download) (BlueRetro-Projekt)
Pinout:
--------
Controller 1
---------------------------
TN20-Pin27 > ESP32-GPIO5 Data clock
TN20-Pin28 > ESP32-GPIO32 Data latch
TN20-Pin25 > ESP32-GPIO19 Serial data
Controller 2
---------------------------
TN20-Pin26 > ESP32-GPIO18 Data clock
TN20-Pin30 > ESP32-GPIO22 Serial data
Power-Button(PB) & USBC
-----------------------
USBC(+) > PB-Pin1
PB-Pin2 > PB(+) > TN20-5V
USBC(-) > PB(-) > TN20-GND
Bluetooth-Button(BTB)
----------------------------------------
BTB-Pin1 > ESP32-IO0 (Right Pin of the ESP32-Boot-Button)
BTB-Pin2 > BTB(-) > ESP32-GND
BTB(+) > ESP32-GPIO17