1 / 4
Foamcore box: Filament dryer on heatbed
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Box from 3mm foamcore and corcer pieces. Can be used as a filament dryer.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 49
- Makes
- 0
- Views
- 577
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Transform your print bed into a cost-effective filament dryer with this foamcore box! Easily assembled from 3mm foamcore and 3D-printed corner pieces, it features an adjustable vent for optimal moisture release. Use it to dry filament without investing in an expensive dryer. Watch the video for a comparison with commercial dryers.
Printing
- Material: PETG
- Supports: None
- Print Orientation: for edges: 45 degrees, as on picture below.
- Additional Settings: Turn on brim
Parts List
- foamcore sheets - cut according to template (PDF attached)
- 1x
- 4x
- 3D-printed corner pieces
- 3D-prit ned top vent
- optional - you can just punch holes or leave tiny gap on foamboard
Assembly
- Slide foamboard into grooves of 3D-printed corners
- Apply a bit of CA glue for extra stability
A3 template included for precise cutting of foamboard.
Placement on print bed:
I used sequential printing with adjusted height for this.
How it works:
Results:
PETG drying test. Ded on 60 ,75 , and then 85 °C.