1 / 8
PreSonus Eris E3.5 wedge base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Angled base for PreSonus Eris E3.5 speakers. Measures 130mm wide, and 145mm deep, with a 40mm incline in the front.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 109
- Makes
- 3
- Views
- 454
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Angled base for PreSonus Eris E3.5 speakers. Measures 130mm wide, and 147mm deep, with a 40mm incline in the front and a small lip in the back to prevent the speaker from sliding. Cutouts in the version with holes are 25mm in diameter and 3mm deep.
No supports needed.
Example printed on a Bambu Lab P1S at 0.20mm Standard, with 10% 3D Honeycomb infill. Total filament used for one base was estimated to 58.22g.