1 / 3
Silica Holder For 5 Spool Auto Rewinder Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Silica Gel box that fits on the lower bars of the 5 Spool Auto Rewinder Adapter
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 156
- Makes
- 8
- Views
- 533
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The 5 spool adapter works well but blocks access to the silica gel boxes. This solves that problem. Other models I looked at sat under the adapter A frames and are therefore a little fiddly to get out, this solves that problem by sitting on the lower A frame joiner rails with handles so you can grab it.
I also included a funnel on one end so it is easier to pour the silica back into a container when used up before drying in the oven.
Print settings:
- Material: I used PETG but anything really
- Print setting: 0.2mm Speed
- Infill: I used 15% but 10% should work as well
- Supports: Under the handles only