TESLA Logo Label
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.11 – €0.14 net (excluding VAT)
For file: TESLA Logo V01_0.4n_0.2mm_PLA_MK4IS_9m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.12 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Do you repair old TESLA electronics from the former Czechoslovakia? This model may be useful for you.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 39
- Makes
- 2
- Views
- 172
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Do you repair old TESLA electronics from the former Czechoslovakia? This model may be useful for you.
Print instructions:
- Material: PLA
- Material Colour: Black and Silver (Aluminium)
- Layer: 0,2 mm
- Perimeters: 2
- Infill: 15 %
- Print speed: 40 mm/s (Recommend)
- Supports: No
- Brim: No
This model does not require any special settings, more details in the attached 3MF file.
Assembly instructions:
Just stick the printed part with a suitable glue.
Custom modification:
If you want to modify the model, I am attaching the STEP file and a link to my OnShape.
Note:
Please don't forget to leave a rating or a comment. I will be glad for any feedback, so I can correct any mistakes in the design. Thank you very much.
Print visions, create reality!