Front Panel for ATX-Powersupply
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.17 – €2.65 net (excluding VAT)
For file: ATX-Panel_0.6n_0.4mm_PETG_MK3S_1h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.41 excluding VAT (range midpoint).
- Weight reported by the author
- 53 g
- Print time reported by the author
- 1.49 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fixed voltage outputs, USB loader and Step-Up-Converter
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Primarily inspired from this Instructable I build an ATX-Powersupply. As I had a metalcase laying around I just printed the frontpanel.
List of elecric compnents: See Instructables.
Size: 234 x 96 mm
Adapt it for any other housing using the Fusion 360 drawing.
Gcode is configured for a colorchange for the frames and the labeling.