Koss Porta Pro mounts for Varjo Aero (also XR-3 and VR-3)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You will need the Left and Right beams from https://www.thingiverse.com/thing:3666505/files and a pair of Koss Porta…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need the Left and Right beams from https://www.thingiverse.com/thing:3666505/files and a pair of Koss Porta Pro headphones.
Print the beams without supports and the clips for the headbands with support to make the round knob that goes into the slot well defined.
Remove any burrs after printing with a file or fine blade, clip the headphones into the beams, attach the clips to the headband (easier in the rear where the headband has a slot) and then slide the beams onto the clips.
Print Settings
Printer:
E3D Toolchanger
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm layers, .4mm nozzle
Infill:
15-20%
Filament: Doesn't matter PETG tested, others should work your choice
Category: Video Games