Xbox 360 Controller Wheel
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.39 – €1.70 net (excluding VAT)
For file: Xbox Controller Wheel_0.4n_0.2mm_PETG_MK4S_1h40m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.55 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.67 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A cool controller wheel for the xbox 360 for playing racing games.
- Rating
- 4.333 / 5
- Likes
- 133
- Downloads
- 691
- Makes
- 5
- Views
- 3,351
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The wheel can make one of the joysticks not move all of the way, so if your game supports it you might want to change the controls.
You will need a 608 bearing for the wheel. If you are going to print one I recommend the one by zimo.
Printing Settings:
You will need to print this with PETG or else it will not work. If you use PLA it will break when trying to put it on because it is weaker and less flexible than PETG. The best orientation for printing is on its side, so that the layers will not snap apart when bending it to put it on the controller. You should set supports to everywhere, since there is lots of overhangs.
| Resolution : | 0.2 | Supports | YES |
| Infill : | 20% Gyroid | Raft: | NO |
| Material: | PETG | Filament Designation : | ANY |
More designs
