Home Assistant Wyoming Satellite with Jabra410 and RPI zero 2w
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wyoming satellite using a Jabra 410 conference speakerphone and RPI zero 2w
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 116
- Makes
- 0
- Views
- 2,787
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Wyoming Satellite based on Jabra 410 and Raspberry Pi Zero 2W
This guide explains how to build a Wyoming satellite using a Jabra 410 speakerphone and a Raspberry Pi Zero 2W.
Bill of Materials (BOM)
- Jabra 410 (Jabra 510 should be compatible since it uses the same hardware, but this is untested)
- Micro USB cable with both power and signal lines, compatible with the Pi's micro USB port
- Raspberry Pi Zero 2W
- Power supply or a power USB cable if you plan to plug it into a wall outlet with a beefy USB outlet.
Caveats
Unreliable Wifi Chip!
For some reason I don't understand, the wifi chip on the pi zero 2w keeps crashing every few hours. I have tried many approaches that failed:
- Using a 5V4A supply (intended for a Pi5, should be plenty for the pi + the Jabra)
- Downgrading the wifi firmware
- Trying both bullseye and bookworm
- Using 32 bit OS ---- this actually fixes the wifi chip, but the openwakeword depends on XNNpack that is not available on the 32bit ARM platform. Wake word detection becomes so so that it's not a viable fix.
Options that work at the moment
Option1:
Downclock the pi zero 2w (in config.txt):
arm_freq=600
arm_freq_min=600With this downclocking I have been running one satellite 247 for over three weeks (and stilkl going). Only time will tell.
Option2:
- Put a heatsink on the wifi chip (and also one on the CPU when you are at it)
- In config.txt:
over_voltage=1This heatsink fix appears to work for me for over a week (and still going). Only time will tell.
Update Jabra Firmware
One speaker I got keeps blinking the white light (instead of a steady white) when connected to the pi. Everything else works normally with this unit, but I was paranoid so investigated into the issue. It turns out to be an issue with the old Jabra firmware (it was on v1.8).
The assembly involves changing the USB on the Jabra into a microUSB, and if you don't have an adapter cable, you'd find it trouble to connect it to your Windows PC/Mac to update the firmware after the assembly. Therefore, I recommend connecting the speaker to your Windows/Mac to update the firmware before proceeding with the assembly — lookup how to do that on Jabra official website.
Assembly Instructions
1. Prepare the USB Cables:
- Cut the micro USB cable and the USB cable from the Jabra 410.
- Splice them together by soldering. Most USB cables have color-coded wires; match the colors carefully when soldering.
- Ensure the cable is less than 80mm in length. This allows you to plug the Jabra 410 into the Pi's micro USB port.
2. Set Up the Wyoming Satellite:
- Follow the [tutorial](https://github.com/rhasspy/wyoming-satellite/blob/master/docs/tutorial_installer.md) to set up the Wyoming satellite.
- Make sure the system works fully in Home Assistant before proceeding with the full assembly.
3. Disassemble the Speaker:
- Remove the ring-shaped foam at the bottom of the speaker.
- Remove and keep the six screws.
- Take off the speaker's base; you won't need this part.
4. Assemble the Components:
- Thread the speaker's (soldered) USB cable through the center hole of the adapter part.
- Screw the adapter part onto the Jabra using the six screws.
- Plug the speaker and the power source into the Pi.
- Screw the Pi onto the case part with M2.5 4mm screws, ensuring the wires fit neatly.
- Route the power cable out through the case's outlet (a small round cutout), and snap in the cable stopper part.
- Twist lock the base onto the adapter.
5. Final Assembly:
- Ensure all components are securely in place.
- Verify that all connections are correct and the device is functioning properly.
And you're done! Your Wyoming satellite is now assembled and ready to use.
