Vickywood Big Willow 220 Clamps / Halteklammern Vickywood
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clamps for the Roof Tent Big Willow 220
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Update: Die neuen Vickywoodstangen sind alle 25mm, sod ass die Klammern angepasst sind.
Hallo liebe Community,
bei unserem Big Villow 220 gehen öfters die Halteklammern im Eingangsbereich kaputt. Daher habe ich ein 3D Modell zum drucken entworfen, womit die Halteklammern ausgedruckt werden können.
Ich benötigt dazu:
2 x M4 Mutter (7x3,2mm)
2 x M4x10mm Schraube
Den Ausdruck ohne Supports in PLA oder PTEG. Die Mutter anschließend in die Öffnung drücken, dann können die Teile eingeschraubt werden. Die Nieten können mit einem M6 Bohrer ausgebohrt werden.
-------------------------------
Hello dear community,
The retaining clips in the entrance area of our Big Willow 220 often break. So I designed a 3D model to print with which the retaining clips can be printed.
I need:
2 x M4 nut (7x3.2mm)
2 x M4x10mm screw
Print without supports in PLA or PTEG. Then press the nut into the opening, then the parts can be screwed in. The rivets can be drilled out with an M6 drill.
