Final Fantasy XI - Nation Flags
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are models of the nation flags from the Square-Enix mmorpg Final Fantasy XI. They are 100mm on a side.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 55
- Makes
- 1
- Views
- 266
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
These are "Lithophane" models of the nation flags from the Square-Enix mmorpg Final Fantasy XI. They are 100mm on a side and 5mm tall. Currently I have models for Windurst, San d'Oria and Bastok. I hope to do more in the future. Please get in touch if you can assist in designing higher resolution samples of the other flags. Credit for the original .jpg files goes to Quantum_Slasher on deviantart (http://quantumslasher.deviantart.com/).
Print Settings
Printer:
Powerspec Ultra 3D Printer
Rafts:
No
Supports:
No
Resolution:
.1 mm layer height
Infill:
50% (25% or more is probably fine)
Notes:
Hatchbox Wood Fill PLA
190c nozzle temp
60c heated bed on polyamide
Post-Printing
Prints with moderate stringing using the Hatchbox Woodfill PLA. I used a diamond file to remove the strings. Regular Inland brand PLA printed much cleaner but wasn't quite the surface finish I was interested in.
How I Designed This
I used the .jpg files of the nation flags at http://quantumslasher.deviantart.com/ and edited them in photo shop to adjust colors and clean up some details. I then used the Lithophane tool at http://3dp.rocks/lithophane/ to convert these images to a 3D model.
Category: Toys & Games