Articulated Jumping Spider Keychain Version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keychain version of my articulated jumping spider model
- Rating
- 5 / 5
- Likes
- 147
- Downloads
- 901
- Makes
- 5
- Views
- 2,702
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Share Alike
This model has been altered to have a large thick key-ring loop so that it can be made into a key-chain. The original also has a butt loop but it is much smaller and thinner.
Suggested scale for printing is 65%-80%.
I was able to print the model at 50% scale but did notice a spot between the first two legs that slightly stuck. Printing at this size or smaller may be difficult. I suggest slowing down your print speed if you attempt to print small.
*I printed my models on an Ender 3 V3 SE. Results may differ on other printers.
Suggested settings for BODY:
Support: NO
Brim: YES
First layer slowed to 30mm/s
Suggested settings for EYES:
Support: NO
Brim: NO
All layers slowed to 20-30mm/s (the smaller the scale, the slower you need to go, and make sure bed is squeaky clean!)
*It may not be possible for some printers to print eyes for models below 65% scale. I suggest only printing the “no-eyes” model for sizes 75% and higher.
This model is 100% my own creation and I give the following permissions:
You can:
Sell printed models (online or locally)
Create remix versions with attribution
Please don't:
Sell the model files
Claim the model as your own
Claim remixes as solely your own