1 / 6
FM-Poland / AllStar hotspot with OLED, Shari and Raspberry Pi 2 or 3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
FM-Poland / AllStar hotspot using a Chinese Shari radio module, OLED display and Raspberry Pi 2 or 3
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 61
- Makes
- 0
- Views
- 881
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Enclosure for:
- Raspberry Pi 2 / 3 in enclosure from aliexpress ( https://pl.aliexpress.com/item/1005005872780987.html )
- Shari SA818 radio module ( https://pl.aliexpress.com/item/1005003245127518.html )
- 1.3" OLED I2C screen ( already had one but these should fit - untested - https://pl.aliexpress.com/item/1005006115101785.html )
- two 10cm usb cables ( https://pl.aliexpress.com/item/1005003659290814.html )
- 2xM2.5 10mm
- wires for connecting rpi gpio with oled
- 4 small (~5mm diameter) silicone feet (with adhesive) from local shop
- LFCN490 filter added before antena connector to suppress unwanted harmonics even more ( https://wiki.fm-funknetz.de/doku.php?id=fm-funknetz:technik:shari-sa818#empfohlentiefpassfilter_zwischen_modul_und_antennenbuchse )
For FM Poland HAM network I'm running https://github.com/radioprj/raspberrypi/ software.
Printed from PETG (oled part with supports). OLED, after removing gold pins and soldering cables, glued to the printed part with a hot glue. 6mm hole made in enclosure for gpio-oled cables.
Fusion source CAD file is available.
20240703: more clearance for oled