1 / 2
Clamping strip for DIN A4 sheets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clamping strip for (also laminated) DIN A4 sheets for wall mounting.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
| Dimensions: | ca. 226 x 57 x 18 mm |
| Weight: | ca. 67 g ( = ca. 22 m ) |
| Support: | Not needed |
| Hints: | For drum and pins (version 1) use an outer brim |
Two pieces of the selected pin (pin1 OR pin2) are required.
If necessary, add a text to "emptyLabel", e.g. with the slicer, otherwise "emptyLabel" can also be omitted.
Assembly instructions
- If needed, glue the label onto the "Body".
- Fill the drum with e.g. fine quartz sand to increase the weight (The drum is closed on one side)
- glue one pin on the open side
- Insert the roll and glue a pin on the other side