Seat Leon joint for trunk cover
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.24 – €0.29 net (excluding VAT)
For file: spare_part_trunk_cover_seat_0.4n_0.2mm_PLA_MK4IS_16m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.26 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 16.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A less fragile joint for the trunk cover of the Seat Leon.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 43
- Makes
- 0
- Views
- 396
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
For test reasons, I used PLA, which has so far survived the summer temperatures in Germany. Nevertheless, I generally recommend using a heat-resistant filament.
The part may break at the solid joints, but this does not affect its functionality. This is due to the fact that the part has been designed so that it can be printed without support structures.
Created in Autodesk Fusion