kp5L filament guide for top mount spool holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
due to most filament makers switching to cardboard spools and kingroon useing rollers i had to fix it
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
for cardboard spools ender style holders are best but the kp5L has rollers and the runout sesnsor in a wierd place so this fixes that by using a ender style spool holder. my goal was to make it fully 3d printed and if you 3d print the spool holder (links below) it is.
putting it together:
1) print all the parts you need if you have an ender style spool holder use that but if you need to print it print first and print this model (duh)
2) remove a screw from the screen and set that aside
3) remove the left most screw on the top bit
4) use the screen screw to screw the spool holder in on top
5) use the top screw to screw in the screen
6) take the other screen screw out and put the filament guide inplace
7) screw it all together and your good to go
ender style spool holder printable files: https://www.printables.com/model/558555-arm-spool-bracket-ender-3-style
ender style spool holder round bit: https://www.printables.com/model/445347-ultimate-spool-holder-for-ender-3-style-printers
kp5L spool holder: https://www.printables.com/model/574002-kingroon-kp5l-filament-spool-holder