17mm Shock Absorber Nut Removal Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A "special tool" required to remove the "sunken" nut for a shock absorber on a 2019 Hyundai Santa Fe
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
While doing the replacement of the shock absorbers on my 2019 Hyundai Santa Fe myself, I quickly realized that I didn't have the tool required to remove the nuts that are “sunken” in the shock absorber's dust cover.
This is a tool that is designed to help with this task. The “raised end" sinks into the dust cover end and holds the nut in place while you can turn the push rod using pliers and/or an appropriately sized wrench.
Note that this tool will not last forever and broke after the fourth use, but your mileage may vary depending on your print settings.
Printed using eSUN PETG at 0.2mm height with 6 walls and 40% grid infill.
On the K1 this took roughly 30 minutes.
(The photos attached here were of a first iteration of the part; the subsequent version which is uploaded here is the correct size)