Octo Compass for MMU/AMS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the octo compass from the show "Octonauts", for printing on multi-material machines.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 61
- Makes
- 0
- Views
- 475
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
This is my remix of the Octo Compass by Pchelkaa. See differences section for detailed changes.
Long story short, I made it smaller and changed lots of things to make it print nicely on a multi-color printer. I also did away with the paper graphics glued on the dial and control panel, in favor of physical printed graphics.
You'll need an M3 lock nut and an M3 x 12mm socket head cap screw for assembly.
To secure the needle, I set the needle on the spindle, and quickly softened the spindle with a torch, and then used a pointed center punch to flair the tip of the spindle while it was still soft. Alternatively, you could probably use a soldering iron instead.