1 / 1
ubiquiti G5 Turret Ultra - 68mm Unterputzdose Adapter / Flush-Mount Box Adapter — image 1

ubiquiti G5 Turret Ultra - 68mm Unterputzdose Adapter / Flush-Mount Box Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Eine Adapterplatte zur Befestigung einer ubiquiti G5 Turret Kamera auf einer typischen runden 68mm Unterputzdose.

Rating
3 / 5
Likes
6
Downloads
167
Makes
0
Views
1,396
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

DEUTSCH:

Eine Adapterplatte zur Befestigung einer ubiquiti G5 Turret Kamera auf einer typischen runden 68mm Unterputzdose.

Von der Rückseite (die Seite mit dem zusätzlichen Ring darauf) werden Einschmelzmuttern für M3 eingebracht

Die Adapterplatte wird danach mit Senkkopfschrauben in die dafür vorgesehenen Halter der Unterputzdose geschraubt. Der Zentrierring auf der Rückseite passt dabei genau in die Unterputzdose und hilft beim zentrieren.

Zum Schluss kann man dann die Basisplatte der G5 Turret Ultra Kamera mit der gedruckten Dichtung zusammen auf die Adapterplatte schrauben.

Material und Einstellungen:

  • Adapterplatte: ABS, 35% Gyroid Infill, 4 Perimeter, 0,2mm Schichtdicke
  • Dichtung: TPU(95), 100% Infill, 4 Perimeter, 0,2mm Schichtdicke

Anmerkung: Bilder folgen, sobald ich zur Montage gekommen bin.

 

 

ENGLISH:

An adapter plate for mounting a Ubiquiti G5 Turret camera on a typical round 68mm flush-mounted box.

From the back (the side with the additional ring on it), heat-set nuts for M3 screws are inserted.

The adapter plate is then screwed into the designated holders of the flush-mounted box using countersunk screws. The centering ring on the back fits precisely into the flush-mounted box and helps with centering.

Finally, the base plate of the G5 Turret Ultra camera can be screwed onto the adapter plate together with the printed gasket.

Material and Settings:

  • Adapter Plate: ABS, 35% Gyroid Infill, 4 Perimeters, 0.2mm Layer Thickness
  • Gasket: TPU(95), 100% Infill, 4 Perimeters, 0.2mm Layer Thickness

Note: Pictures will follow once I get to the assembly.

Tags