Plastic barrel bung caps with gardena hose connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plastic barrel bung caps for 208 l (55 gallon) barrels with buttress thread with gardena hose connector
- Rating
- 0 / 5
- Likes
- 57
- Downloads
- 630
- Makes
- 0
- Views
- 2,383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
70 mm and 55 mm plastic barrel bung caps with buttress thread for plastic barrels with closed tops.
The caps has a 26 mm fine thread for connecting a included gardena hose connector or just a plugg.
The gardena connector part with 26 mm thread fits in the existing small bung cap in my 208l /55 gallon barrel.
If you want it water tight two o-rings are required, one standard gardena hose connector o-ring and one 3.1x28OD. It works well without o-rings but will not be water tight.
I use them as a sealed rain water barrel. With no light nothing will grow inside.
Look at my other models to make the perfect rain water barrel from a plastic drum!
Update:
Uppdated this model with a small cap (about 55 mm). My plastic barrel has a small and a large cap. I would guess this is standard.
The gardena hose connector was modified with a larger inner diameter to be less flow restrictive.
I also added a small M26 plugg that seals of the cap if you don't want to connect a hose.
Update 2:
I've added printable seals/gaskets for the caps which prints in TPU.
Also I've made socked wrench adapters for these caps in a seperate model, https://www.printables.com/model/1110967-plastic-barrel-cap-socket-wrench-adapters which is needed to tighten the caps enough for use with seals.
Print advice:
Extrusion multiplier: print with a slight overextrusion to avoid “sweating” of the print, I used 1.05
Print material: PETG (PLA will work as well)
No supports needed
seals/gaskets should be printed in TPU and with as small layer height as possible