1 / 8
AirUp bottle click cap (M3)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This lid can be printed in PLA / PLA+ / PETG / ABA etc.
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 56
- Makes
- 2
- Views
- 306
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
[GER / DE] AirUp Flaschen Deckel mit M3 Schraube
Dieser Deckel kann in PLA / PLA+ / PETG / ABA usw. gedruckt werden.
Es wurde mit folgenden Einstellungen gedruckt:
- Layerhöhe: 0,20mm
- Infill: 20%
- Support: nN
- Druckplattenhaftungstyp: Brim / Skirt
Wenn es dir gefällt was du siehst, bitte lass ein Like <3 da!
[ENG / EN] AirUp bottle cap with M3 screw
This lid can be printed in PLA / PLA+ / PETG / ABA etc.
It was printed with the following settings:
- Layer height: 0,20mm
- Infill: 20%
- Support: nN
- Printing plate adhesion type: Brim / Skirt
If you like what you see, please leave a like <3!