Two-color Yin and Yang (7 piece assembly)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A yin and yang design that fits together like a very easy burr puzzle.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 1
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
This 7-piece 3D printed yin and yang is 40mm in diameter and fits together similarly to a burr puzzle. I was not trying to make a puzzle. I just wanted to make a multi-color object that I could fit together without glue. The inside circles are hourglass shaped and held in place by the small bars. Once those are placed, the halves fit together and are held by the long bar. You can take it apart by reversing the steps but you may need a toothpick or similar to push out the long bar.
Print one part of each color except for the long bar. You only need one. The photos show assembly. It holds together very well though is not quiet as rigid as I would like. You could probably scale it but you might need to adjust the bar cross-section for tolerance. You will also get a larger gap between halves if you increase the scale.