Filament Pop Rivets 6mm dia. x 3mm length
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A rivet that can be popped into a 6mm or 1/4" hole and made more-permanent by pushing a short length of 1.75mm…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 36
- Makes
- 0
- Views
- 208
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
A rivet that can be popped into a 6mm or 1/4" hole and made more-permanent by pushing a short length of 1.75mm filament into it.
A horizontal and vertical orientation has been set up to see which prints best. The horizontal one may be printed by adding supports. Most slicers can do that automatically.
If layer adhesion is a problem, the horizontal rivet may be stronger.
Otherwise, just split objects and delete the one you don't want from within the slicer.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
60%
Filament: Polymaker Polyflex PETG
Red
Category: DIY