1 / 2
Supportless - Improved Allen Wrench / Hex Key Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated to be printed without support material
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 78
- Makes
- 1
- Views
- 363
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
- All the holders can be printed without support.
- Each holder requires one or two O-rings. The size of the O-ring is 3.5 mm cross-sectional diameter (CS), and 40mm inside diameter (ID).
- Both the metric and imperial holders has two options, single and double.
- Single option:
- The single option only requires one O-ring, and requires less time and material to print.
- Using one O-ring is plenty enough to hold the keys in place, but if your O-ring is slightly old or larger, the keys might be loose.
- Double option:
- Everything is the same as the single option, it just use two O-rings so the keys are firmly held in place.
- Single option: