Foot_V1.0 for Prusa
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Foot for reducing noises. Holds a squash ball ( pro with 2 yellow dots) and can be screwed onto the alu extrusion
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 44
- Makes
- 0
- Views
- 561
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
In order to reduce the vibration noises coming form the printer, this is a very effectiv way to make your printer more quiet than with the standart feet. Simply screw them with slot nuts onto the alu extrusion. Fit a squash ball inside (I´ve chosen a pro one with 2 yellow dots and it fits perfectly snug). Width of the rectangular is 30mm. The holes are for M3 screws. I´ll recomend using those type of nut-stones:
https://www.prusaprinters.org/prints/57139-hammermutternutenstein-nut-8-m3-prusa-mini-mk3#_ga=2.155700859.1140478218.1638971047-1363159943.1636108697
Um die Vibrationsgeräusche beim Drucken zu reduzieren habe ich diesen Fuß konstruiert. Deutlich leiser und gedämpfter als mit den Standardfüßen. Einfach mit Hilfe von Nutensteinen an das Aluprofil schrauben. Ein pro Squashball (zwei gelbe Punkte) passt perfekt in den Fuß. Die Breite des Rechtecks ist 30mm. Die Löcher sind für M3 Schrauben. Ich empfehle folgende Nutensteine zu verwenden:
https://www.prusaprinters.org/prints/57139-hammermutternutenstein-nut-8-m3-prusa-mini-mk3#_ga=2.155700859.1140478218.1638971047-1363159943.1636108697
Material: Prusament PETG Galaxy Black
Layerhight: 0.20 speed
Temp: 250°
Bed: 90°
Supports: No
Raft/Brim/Skirt: No
Bedtype: Satin powder
Infill: 30-40% depending on Infilltype
Perimeter: 3
the rest is standard in the prusaprofile