Water hose adapter for extending its range
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Can be used to extend a hose by using this adapter to fix one end to the other hose end.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
Water hose adapter
This is a PETG adapter to connect extend a hose or gap a removed part because of a hole. It is quite tight and has many different positions to squash the hose in place between the rail and the ring.
Hose parameters
The hose in the picture above as about 0.2mm thickness and radius of about 5-6mm. If you add the adapter I've tested it with 2.5 bar and it only had a very small leackage.
Print parameters
I've been using
- a stainless steel nozzle together with Prusament PETG “JetBlack”.
- Set perimeters to 10 so it is very stable and fast to print and basically has no infill this way.
- You can print this standing, see the 10-combined-parts.3mf
Motivation
I created this for a friend because there were no such adapters and he often needs to put together different ends of hoses.
I've added the source files in freeCad, was a hazzle to create those but here it is!